HOW
KIDDIE BUMPER BOATS WORK: The 12 volt motor
and flexible cable system mounted in the bow of
the boat makes it impossible for water to harm
the motor. The flexible cable system, which is
enclosed in a stainless steel tube, and the 2
1/4 propellor are the only parts of our drive
system that are in the water. Its ballast comes
from the weight of the 12 volt battery enclosed
in battery cases which sits in a molded indentation
in the center of the boat. All of this, the oval
shape of the boat itself, and the inflatable,
provide the stability. The steering wheel system
provides quick response in the boat. Water depth
14". The overall design of the KIDDIE BUMPER
BOAT has proven to be a safe and successful revenue-making
ride.
KIDDIE BUMPER BOATS CONSTRUCTION:
Seamless, roto-molded polyester
- MOTOR: 12 Volt, permanent magnet; discharge
- 2 1/2 to 3 1/2 amp. hr.
- DRIVE UNIT: Flexible shaft, all stainless
steel
- STEERING LINKAGE: All stainless steel
- PLASTIC PROPELLOR Connected to marine bronze
hardware, 2 1/2 inches
- INFLATABLE: 28 mil polyester, red/yellow;
yellow/blue; yellow; red; blue
- BATTERY CASE: Molded, high density plastic
- BATTERY: 34 amp hr; maintenance-free, gel-sealed,
rechargeable; non-spillable, deep-cell
- EIGHT CAPACITY: Maximum 90 lbs; ages, 1 1/2
to 9
- RUNNING TIME: 5 hours with our gel-sealed
power pack
- IGNITION OPTIONS: 1. on and off switch; 2.
mechanical key-wind, 1-5 minute timer with 10-second
beeper or light when ride is over. 3. Solid-state
timer (magnetically activated)
- CHARGER OPTIONS: Power 10 multi-charger;
12V - 220 AC
- WEIGHT OF BOAT: 26 lbs without battery
- OVERALL DIMENSIONS: 52" long by 38"
wide by 19" high with inflatable
- FOR INSURANCE PURPOSES: " Kiddie Bumper
Boats" has an accident-free record
POOL SYSTEM AVAILABLE
FOR INDOOR OR OUTDOOR USE: all aluminum (with/
liner) assembles in an hour.
|
